How to get started with the WiFi models of the iTach


<< Last PageNext Page >>

Troubleshooting Note: The setup and configuration process may be restarted at any time by resetting your iTach to its Factory Defaults. To do so, insert a metal pin (a large paper clip is ideal) into the opening approximately 1/8 inch (3 mm) until the reset sequence begins. The reset sequence is indicated by all LEDs on the iTach briefly blinking in unison. Warning: Make sure to use a light touch when resetting your iTach to factory defaults; force may damage your iTach hardware irreparably. __________________________________________________________________

Links

Once your browser has found your iTach, select the iTach Network page which is listed on the left side of your browser. If you are prompted to give a password, enter nothing and press OK.

<< Last PageNext Page >>