The iTach Family of Products
Seamlessly connect, monitor, and control: IR controlled devices, Serially (RS232) connected devices, and relay activated devices (Contact Closure) over a network, and via the Internet. The iTach TCP/IP (Ethernet) and Wireless (WiFi) devices provide a new level of control flexibility, enabling device networking in homes, businesses, schools, or just about anywhere. The product is based on open systems and standards for easy integration and compatibility with PC based control software, iPhone/iPod/iPad control apps, and high-end control systems. Also, be sure to check out our GC-100 line of home control units.
Power Input |
5 to 16V DC@300mA (wall power adapter included) USB power cable allows iTach to draw power from USB port Power over Ethernet (PoE) units available on TCP/IP models: IP2IR-P, IP2SL-P, IP2CC-P International 220V available |
LED Indicators (All Models) |
Power (1), TCP/IP network activity (2), IR port activity (3), Contact Closure activity (3), Serial (RS232) port activity |
Setup |
Integrated web server for easy configuration Configure through TCP/IP set up commands |
iHelp Setup Utility |
Downloadable iHelp software simplifies network discovery and setup |
IR Learning Utility |
Downloadable iLearn (version 2.0) software allows for the capture and storage of IR commands for control uses |
TCP/IP Network Interface |
Connector: RJ45 100/10 Mbit/s Ethernet Protocol Standards: TCP, DHCP, HTTP Models: IP2IR, IP2SL, IP2CC |
Wireless Network Connection |
Industry standard 802.11b wireless interface, 2.5″ antenna Supports wireless LAN Ad-Hoc and Infrastructure modes Compatible to 802.11b Models: WF2IR, WF2SL, WF2CC |
RS 232 Port |
Male DB9 Connector 1200 baud to 115 Kbaud Data Rates Supported Odd, Even, and None Parity Settings Bi-directional hardware RTS/CTS Flow Control Models: IP2SL, WF2SL, IP2SL-P |
IR and Sensor Interface |
Connector: 3.5mm stereo jack 3 Independent selectable IR outputs or sensor inputs 3 IR emitters included 1 IR blaster included (supported on 3rd IR port) Models: IP2IR, WF2IR, IP2IR-P |
Contact Closure/Relays |
3 Integrated Contact Closure Relays w/ transient voltage suppression Screw terminal 24V AC/DC@.5A N.O. contact Allows for control and monitoring of in-line, low voltage wiring Possibilities include: pools/spas, garage doors, irrigation, etc… Models: IP2CC, WF2CC, IP2CC-P |
Device Packaging |
Aluminum extrusion case, rubber end caps and plastic face plates Dimensions (LxWxH): 3.25″x2.25″x1.25″ Weight: 3.25 oz. (6 oz. with power supply) |
Certifications |
FCC (Part 15, Class B), C-tick, CE RoHs compliant |
Shipping Dimensions |
(LxWxH) 6″x3″x2″ Weight: 1 lb. |
Warranty |
Two year limited warranty Support available via phone, email, and extensive support portal |